Acrel Multi-circuit AC Data Center Energy Meter AMC16Z-FAK

Overview

With the rapid development of data center, the energy consumption problem of data center is becoming more and more prominent. The energy management and power supply and distribution design of data center have become a hot issue. Efficient and reliable power distribution system scheme of data center is an effective way to improve the power consumption efficiency of data center and reduce the energy consumption of equipment. In order to realize energy saving in data center, it is necessary to monitor each electrical load first. However, there are many load circuits in data center. Traditional measuring instruments cannot meet the requirements of cost, volume, installation, construction and other aspects. In this case, the multi-circuit monitoring device which is suitable for centralized monitoring in data center is necessary to be used. AMC16Z series AC precision power distribution monitoring device is specially designed for data center server power management.The device designed exquisite, can provide A + B 2 incoming and 96 outgoing’s electrical parameters, the input and output switch and the state of lightning protection device with real-time monitoring. All alarm threshold of measurement channels can be set in separate. Over-outgoing triggers system acoustooptic warning immediately. Highly integrated monitoring loop is realized in the volume of traditional instruments. 

Product Features

  

Dual AC Outgoing Circuits Monitoring ● A+B Dual-side independent AC Circuits Monitoring ● Full Electrical Parameters Monitoring ● Outgoing Branch Circuits Multi-metering

 

Multiple Branch Circuits Metering ● Both 1-phase&3-phase Metering ● Max 36 circuits 1-phase ● Max 12 circuits 3-phase ● Mixed 8 circuits 3-phase and 12 circuits 1-phase for example

 

Power Quality Analysis ● 2nd~31st Harmonic ● Total Harmonic

 

Switch On/Off Status Detection ● A+B Dual Side ● 48-channel of DI (Digital Input)

 

Application in Data Center

  

Wiring Illustration

  

PIN/Terminal Overview of AMC16Z-FAK48

 

Wiring Diagram

 

Voltage&Current Input Wiring of AMC16Z-FAK48 (Demo for A side partial wiring)

 

Dimension

    

Technical parameter 

	Technical parameters					AMC16Z-FAK24	AMC16Z-FAK48
	Measurement parameters					Voltage, current, frequency, active power, reactive power, power factor, activepower, reactive power, switching state
						2-31 times harmonics
	Bus Voltage		Rated		220VAC
		Measurement	±20%
		Overload	Instantaneous voltage 2 times/second
	Currentoutgoing line loop	Rated	50mA
		Range	0.125～60mA
		Overload	Duration 1.2 times, instantaneous 10 times/second
	Input frequency				45～60Hz
	Measurement accuracy	Outgoing line	Voltage/current/active power/active energy level 0.5, reactive power/reactive energy level 1
	Auxiliary power supply				Power supply by AMC16Z-ZA
	Environment	Temperature	Working:-15℃～55℃ Storage:-25℃～70℃
		Humidity	Relative humidity
		Altitude	≤2500m
	Communication				RS485/Modbus-RTU
	Installation method				DIN35mm Guide rail or bottom plate mounting
	IP grade				IP20
	Class of pollution				2
	Safety	Insulation	All terminals and the insulation resistance between the conductive pieces not below 100 m Ω
		Withstand voltage		A-channel voltage and current signal // B-channel voltage and current signal // other ports meet AC2kV 1min between pairs, leakage current should be less than 2mA, no breakdown or flashover phenomenon.
	Electromagneticcompatibility	Anti static interference		Level 4
	Resistance toradiation ofRadio frequencyelectromagneti		Level 3

 Note: The rated of the secondary side input current of AMC16Z-FAK module is 50mA. The default value of the primary side is 50A. If the CT is different, the customer can set the ratio through touch screen or upper computer according to the actual usage.