Acrel Single-phase DIN Rail Energy Meter ADL10-E

Overview

ADL10-E single phase electric energy meter is a new generation energy meter designed by Acrel Co,.Ltd with many years’ experience in designing electricity meters. Measurement, statistic, communication and LCD display functions are installed in the power meter. This power meter has advantages of high stability, low power consumption and data saving after blackout etc. All meters meet the related technical requirements of electronic power meter in the IEC62053-21、IEC62053-22 standards. 

Small Compact Size ● Dimension (L*W*H): 18mm*88mm*70mm

 

Diverse Electricity Parameters Measurement ● U (Voltage) ● I (Current) ● P (Power) ● Q (Reactive power) ● S (Apparent power) ● PF (Power factor) ● kWh (Kilowatt-hours) ● kVarh (Kilovar-hours)

 

DIN Rail Installation ● 35mm standard DIN rail

 

LCD Display ● 8 digits

 

Typical Connection

  

Functions

Function	Function description	Function provide
Measurement of kWh	Single-phase active kWh (positive and negative)	■
Measurement of electrical parameters	Voltage, Current, Active power, Reactive power, Apparent power, Power factor and Frequency	■
LCD Display	8 bits section LCD display	■
Communication	Communication interface: RS485, Communication protocol: MODBUS-RTU	□C

  Technical parameter

Input voltage	Reference voltage			AC220V
	Reference frequency			50Hz
	Power consumption			<10VA
Input current	Basic current			10A
	Maximum current			60A
	Starting current			0.004Ib
	Consumption			<4VA  (Maximum current)
Measurement performance	Accuracy of measuring			1 Class
	Range of measuring			000000.00~999999.99kWh
Communication	Interface			RS485(A+、B-)
	Connection mode			Shielded twisted pair conductors
	Protocol			MODBUS-RTU
Outline (Length × Width × Height)			18mm×96 mm×70mm
Range of temperature		Working temperature			-25℃~55℃
		Storing temperature			-40℃~70℃
Relative humidity					≤95%(No condensation)
Altitude					<2000m

ADL10-E CEADL10-E EAC 1.pdf ADL10-E EAC 2